

When determining how a collator is specified, you typically want to pay attention to the weight and dimensions of the stock a bindery runs. Reason being that a machine that cannot handle the heaviest board or largest sheet will constrain every job that follows. At Col-Tec, we build collators for a wide range of stock weights and sheet formats, yet the limits of any machine only become useful when they are set against real work.
This article explains how weight, sheet size and feeding method each shape the purchase of industrial printing equipment, offering a framework for testing a machine against future requirements. Before any machines are compared, however, the stock range itself needs to be defined precisely.
Purchasing discussions often begin with speed, price or footprint, yet each of those figures only has meaning once the stock is known. A collator rated for a high throughput delivers little if it cannot feed the board used for covers, or if it marks the coated sheets that make up most of the work.
For that reason, the first of any sensible machine selection criteria is a written description of the production mix that includes the lightest and heaviest weights, the largest and smallest sheets, the surface finishes involved, and the proportion of work each represents. The extremes, rather than the average job, usually decide which machine is suitable, because one occasional heavy-board run can expose a limitation that daily work never reveals.
Of all these variables, weight has the greatest influence on how a collator behaves and feeds, so it is the logical place to begin.
Weight governs how sheets separate from a pile, how stable a stack remains and how much force the feeding mechanism must apply. Our collators are built to cover a broad GSM range, from light paper through to heavy board, and the demands at each end of that span are very different. Thin stock is prone to static, curl and double feeding, whereas heavy board is stiff and places greater loads on feeders and delivery trays. A single maximum figure reveals only part of a machine’s behaviour.
When assessing industrial printing equipment, it is therefore worth recording not only the heaviest weight a machine can handle but also how consistently it handles the lightest, since a collator that performs well at one extreme may need adjustment at the other. Weight describes only the material, however, and the physical dimensions of each sheet impose a separate set of constraints.
Weight and format together determine how sheets must be fed, supported and delivered, so the dimensions of the stock deserve the same scrutiny as its thickness. We build collators for formats ranging from compact signature sizes to large-format work, and a clear sheet size specification allows the right configuration of industrial printing equipment to be defined before any build begins.
Several physical factors follow directly from the sheets involved:
Once weight and size are fixed, the remaining question is how each sheet is lifted from the pile.
The feeding method determines how reliably a collator takes one sheet at a time, and our collators can be configured to suit different materials. In suction-feed collation, vacuum pressure draws a single sheet from the top of the pile, which keeps surface contact gentle and generally suits coated or delicate material. Heavier board, by contrast, needs a feeding arrangement able to overcome its stiffness and weight without losing registration.
These distinctions matter because a mixed stock range rarely sits at one end of the scale. A bindery running lightweight text alongside rigid covers needs a machine configured for both, and the feeder should be tested against the most demanding material rather than the most common. Sample runs using the customer’s own material are the most dependable way to confirm the choice. Bear in mind that suitability today does not guarantee suitability tomorrow, so the assessment must also look ahead.
That forward view is easier to take with a structured assessment. Applying consistent machine selection criteria to any item of industrial printing equipment prevents a purchase being driven by the most recent job rather than the full production mix.
As such, the following checks form a practical starting point:
A framework of this kind produces a defensible specification, and the practical question then becomes who can supply it.
At Col-Tec, we’re a family-owned business that designs and builds its industrial printing equipment in Hampshire, allowing the full GSM range and sheet sizes described above to be matched to a customer’s actual work. The range includes stock collators for standard requirements, alongside custom, smart and plastic card collators where the brief demands something different. Each collator specification is confirmed in a detailed order summary before manufacture begins.
Verification continues throughout the build. Customers receive live video of the machine being manufactured, and before delivery the machine can be inspected in person or tested with supplied material samples, with the results shared by video link for approval. Installation and operator training follow, typically over four to five days. A specification on paper is useful, but watching a machine handle real stock settles the matter, and the next step is a conversation with the engineers who will build it.
Weight, sheet size and feeding method decide whether a collator suits the work it will be asked to do, and each should be defined before a machine is chosen. To discuss your requirements with a Col-Tec engineer, call us on +44 (0) 1425 627755 or complete the contact form, and we’ll be in touch.
A clear description of the stock you run is enough to begin, and a machine matched to that stock is the surest basis for consistent production.
Recent Posts


